INCONEL® alloy 690 UNS N06690/W. Nr. 2.4642
|
Alloy |
element |
C |
Si |
Mn |
S |
Ni |
Cr |
Fe |
Cu |
|
Alloy690 |
Min |
|
|
|
|
58.0 |
27.0 |
7.0 |
|
|
Max |
0.05 |
0.50 |
0.50 |
0.015 |
|
31.0 |
11.0 |
0.50 |
|
Aolly Status |
Tensile strength Rm Mpa Min |
Yield strength R P 0. 2 Mpa Min |
Elongation A 5 % Min |
|
annealed |
241 |
586 |
30 |
|
Density g/cm3 |
Melting Point ℃ |
|
8.19 |
1343~1377 |
od, Bar, Wire and ForgingStock - ASTM B / ASME SB166, ASTM B 564 /ASME SB564
Seamless Pipe and Tube -ASTM B / ASME SB 163,ASTM B 167 / ASME SB 829,ASTM B 829 /ASME SB 829,
Plate, Sheet, and Strip -ASTM B / ASME SB 168 /906
Welding Products -INCONEL Filler Metal 52 -AWS A5.14 / ERNiCrFe-7;INCONEL Welding Electrode 0 10 20 30 40 50 60 70 152 - AWS A5.11 / ENiCrFe-7
Related products
-
INCONEL® alloy 601 UNS N06601/W.Nr. 2.4851
INCONEL nickel-chromium-iron alloy 601 is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of INCONEL alloy 601 is its resistance to high temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined and welded. Further enhanced by the aluminum content.
-
INCONEL® alloy 625 UNS N06625/W.Nr. 2.4856
INCONEL nickel-chromium alloy 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). The properties of INCONEL alloy 625 that make it an excellent choice for sea-water applications are freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.
-
INCONEL® alloy 718 UNS N07718/W.Nr. 2.4668
INCONEL 718(UNS N07718) is a high-strength corrosion resistant nickel chromium material. The age-hardenable alloy can be readily fabricated. even into complex parts. Its welding characteristics. especially its resistance to post weld cracking, are outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage. It is also used for fasteners and instrumentation parts.
-
INCONEL® alloy x-750 UNS N07750/W. Nr. 2.4669
INCONEL alloy X-750 (UNS N07750) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300 oF. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300 oF, heat-treated material has useful strength up to 1800oF. Alloy X-750 also has excellent properties down to cryogenic temperatures.
-
INCONEL® alloy 600 UNS N06600/alloy600/W.Nr. 2....
INCONEL(nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F(1095°C).