INCOlOY® alloy 825 UNS N08825/W.Nr. 2.4858
| Alloy | element | C | Si | Mn | S | Mo | Ni | Cr | Al | Ti | Fe | Cu |
| Incoloy 825 | Min | 2.5 | 38.0 | 19.5 | 0.6 | 22.0 | 1.50 | |||||
| Max | 0.05 | 0.5 | 1.0 | 0.03 | 3.5 | 46.0 | 23.5 | 0.2 | 1.2 | 3.0 |
|
Aolly Status |
Tensile strength Rm Mpa Min |
Yield strength R P 0. 2 Mpa Min |
Elongation A 5 % Min |
|
annealed |
586 |
241 |
30 |
|
Density g/cm3 |
Melting Point ℃ |
|
8.14 |
1370~1400 |
Rod, Bar, Wire and Forging Stock - ASTM B 425, ASTM B 564, ASME SB 425, ASME SB 564
Plate, Sheet and Strip - ASTM B 424, ASTM B 906, ASME SB 424, ASME SB 906
Pipe & Tube - ASTM B 163, ASTM B 423, ASTM B 704, ASTM B 705, ASTM B 751, ASTM B 775,ASTM B 829
Other Product Forms - ASTM B 366/ASME SB 366 (Fitting)
● Excellent resistance to reducing and oxidizing acids
● Good resistance to stress-corrosion cracking
● Satisfactory resistance to localized attack like pitting and crevice corrosion
● Very resistant to sulfuric and phosphoric acids
● Good mechanical properties at both room and elevated temperatures up to approximately 1000°F
● Permission for pressure-vessel use at wall temperatures up to 800°F
Related products
-
INCOLOY® alloy 925 UNS N09925
INCOLOY alloy 925 (UNS N09925) is an age hardenable nickel-iron-chromium alloy with additions of molybdenum, copper, titanium and aluminum. It is designed to provide a combination of high strength and excellent corrosion resistance. The nickel content is sufficient for protection against chloride-ion stress corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing chemicals. The molybdenum aids resistance to pitting and crevice corrosion. The alloy chromium content provides resistance to oxidizing environments. The titanium and aluminum additions cause a strengthening reaction during heat treatment.
-
INCOLOY® alloy A286
INCOLOY alloy A-286 is an iron-nickel-chromium alloy with additions of molybdenum and titanium. It is age-hardenable for high mechanical properties. The alloy maintains good strength and oxidation resistance at temperatures up to about 1300°F (700°C). The alloy is austenitic in all metallurgical conditions. The high strength and excellent fabrication characteristics of INCOLOY alloy A-286 make the alloy useful for various components of aircraft and industrial gas turbines. It is also used for fastener applications in automotive engine and manifold components subject to high levels of heat and stress and in the offshore oil and gas industry.
-
INCOLOY® alloy 254Mo/UNS S31254
254 SMO stainless steel bar, also known as UNS S31254, was originally developed for use in seawater and other aggressive chloride-bearing environments. This grade is considered a very high end austenitic stainless steel; UNS S31254 is often referred to as a “6% Moly” grade due to the molybdenum content; the 6% Moly family has the ability to withstand high temperatures and maintain strength under volatile conditions.
-
INCOLOY® alloy 800 UNS N08800
INCOLOY alloy 800 (UNS N08800) is a widely used material for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C). Alloy 800 offers general corrosion resistance to many aqueous media and, by virtue of its content of nickel, resists stress corrosion cracking. At elevated temperatures it offers resistance to oxidation, carburization, and sulfidation along with rupture and creep strength. For applications requiring greater resistance to stress rupture and creep, especially at temperatures above 1500°F (816°C).
-
INCOLOY® alloy 800H/800HT UNS N08810/UNS N08811
INCOLOY alloys 800H and 800HT have significantly higher creep and rupture strength than INCOLOY alloy 800. The three alloys have nearly identical chemical composition limits.